Get a copy of our free Installation Guide
.png?width=512&height=800&name=Untitled%20design%20(8).png "Untitled design (8)")
Frequently asked questions
What types of barriers do Absorb-M's connect to?
With its unique universal transition the Absorb-M crash cushion connects to most steel and concrete barriers available in Australia - such as Barrier Guard (BG800), QLD Single slope, JJ Hook, T-lock, DB80, Highwayguard, Safezone, Zoneguard, Defender barrier and more…
What speed zones can the Absorb-M be used in?
Absorb M's are crash rated to MASH TL2 and MASH TL3 and have an accepted impact speed of up to 80 kph.
What are the dimensions of the Absorb-M Crash cushions?
The system has a nominal 1067mm height, 610mm width, and an effective length
of 6.39m for 80 km/h and 4.46m for 60 km/h. The maximum length of the system,
as measured from the Nose Plate to the end of the Transition Strap is approximately
7.22m for 80 km/h and 5.29m for 60 km/h.
Does it get anchored to the ground?
No - they are a completely anchorless system with no ground foundation requirements.
Do all the cartidges get filled with water?
No, the Absorb-M system is designed to be installed with the front element always empty with the remaining element(s) full of water. Failure to do so will result in improper performance of the system and may cause serious bodily harm.